IP video recorder installation

TRASSIR supports operation with various IP video recorders. The instructions below will help you to prepare them to connect to the server.

Warning

Switch off power supply before performing any activities on the device.

Important

We strongly recommend you check the user manual and device compatibility list before connecting any equipment to the IP video recorder.

follow the next steps before connecting IP video recorder to the server:

  1. Install hard drive into the device and fix it.

  2. Connect network cable to RJ-45 (UTP) slot on the device. In case the device is directly connected to computer it is necessary to use cable with crossover crimping scheme.

  3. Connect one or several cameras to the relevant ports:

    • RJ-45 - for IP-cameras
    • BNC - for analogue cameras

  4. Connect audio devices to the corresponding RCA-ports on the device.

  5. Connect contacts for alarm inputs/outputs operation.

  6. Connect RS-485 port contacts for work with PTZ cameras.

  7. Stabilize the IP video recorder and power it on.

  8. Open WEB-interface of the device and format the hard drive.

  9. Set up IP video recorder using SADP app.

After that, you can add device.