Access schedule

This section allows you to create and edit schedules for access levels setting.

Go to Plugins -> Access Control -> Access levels -> Access schedules .

To create a new schedule, press Add and follow the next steps:

  • enter the schedule name, which will be displayed in the access level settings;
  • add comment, if necessary;
  • add access levels to which this schedule will be assigned to;
  • customize the schedule (the schedule customization is described in detail below).

After that, you can check the schedule for a week as well as for a month.

Schedule settings

You can create the following types of schedule:

  • Calendar week is a schedule for the specific days of the week.
  • Shifts is a schedule that specifies a cycle of intervals in which the work schedule depends on the day number in the cycle.

Press Setup schedule to open the schedule settings.

Table 127. 

Follow the next steps to create a Calendar week schedule:

  1. Use the Working day/Day off toggle switch to identify working days and days off.
  2. Select one of the workdays and use the sliders or the Beginning and End fields to set up the start and the end time of the access level availability and, if necessary, add one or several breaks.
  3. Press the Duplicate to all work shifts link to copy the created schedule to all working days of the week.

Follow the next steps to create a Shifts schedule:

  1. Set the start date of the first shift and create the desired number of working and weekend shifts.

  2. Select one of the work shifts and use the sliders or the Beginning and End fields to set up the start and the end time of the shift and, if necessary, add one or several breaks.

  3. Click Duplicate to all shifts to copy the created schedule to other shifts.

Tip

In order to create a shift that begins on one day and ends on another, choose the time in the End field that is less than or equal to the time in the Beginning field.

Important

The breaks define the time interval within which the person will not have access.

The schedule may not contain more than 3 work intervals per day or shift.

Table 128. 

The Holidays tab lets you add the dates, in which another schedule will be in effect (for example, on pre-holiday and holiday days).


After the synchronization, the access levels added to TRASSIR ACS Enterprise will appear on the corresponding TRASSIR ACS servers.