Features of TrueIP servers setup and operation

TRASSIR ACS connects directly to the TrueIP SIP server to which the devices are connected. In this mode, the system has the following capabilities:

  • Access control via call panels.
  • Equipment performance monitoring.

Before connecting the TrueIP server, you need to pre-configure it.

Follow the steps below:

  1. Open the server web interface in your browser (default: http://[ip address]:8080).
  2. Enter your login and password (default: admin/admin).
  3. In the menu, select Options -> Advanced settings and activate the Advanced settings option.
  4. In the menu, open the Opening doors section.
  5. On the page, click the Add panel button and specify the parameters for connection to the panel.
  6. Click Send.

Tip

For more information on TrueIP SIP server settings, see the server user manual.

If you have any problems setting up the TrueIP server, please contact TrueIP technical support.

For further connection process and description of parameters, see Connecting devices.